|
|
 |
|
|
|
|
Retaining Walls |
|
|
|
|
|
|
| |
Click here
for Permeable / Erosion control literature
|
Turfstone
When pipe or cable is to be installed at a later date, Turfstone is
a great option. It can be removed and replaced after service work
is completed, it provides a safe area and gives a temporary surface
a finished look. For more permanent uses Turfstone applications include
embankments, earth berms, open ditches, lake or stream banks, boat
ramps, firelanes, parking areas and more. back
to top |
| |
 |
|
|
Pallet
40 units
106 sq. ft.
|
Load
560 units (520-Illinois)
1490 sq. ft. (1383-Illinois)
|
Material:
Normal weight concrete @ 140 lbs./cu. ft.
Length: 24" ± 1/8"
Width: 16" ± 1/8"
Thickness: 3-1/2" ± 1/4"
Apertures: 3-5/8" x 3-5/8"
Weight: 70 lbs. (approx.)
Compressive Strength:4000 psi
(ASTM C140-75: 2" cube test specimen)
Absorption: 8.5 lbs./cu. ft. (ASTM C140-75)
Coverage: 2.66 sq. ft., 375 units/1000 sq. ft.
|
| |
|
Monoslab
Monoslab grasspavers are offered by Bend Industries. This product
is the natural look in paving, allowing green space to be protected,
with the option to drive or park on the reinforced surface. Monoslab
eliminates dust and mud in an area where vehicular traffic is allowed
while preserving the look of a lawn. In aviation applications, this
product surpasses FAA specification for aggregate turf and eliminates
wheel bog down regardless of the size of the aircraft. back
to top |
| |
 |
|
|
Measurements
length
width
thickness
area, gross
area, upper surface
area, base surface
weight/grid
strength, compression
braking load, transverse
absorption, water
|
USA / CAN
actual
23-1/2"
15-3/8"
4-9/16"
370 sq. in.
95 sq. in.
326 sq. in.
82 lb. ± 3 lb.
4000 psi
--
13# / cu. ft. |
USA / CAN
nominal
24 in. - 2 ft.
16 in. - 1-1/3 ft.
4-1/2 in. - 3/8 ft.
2-2/3 sq. ft.
2/3 sq. ft.
2-1/2 sq. ft.
82 lb.
4000 psi
--
13# / cu. ft. |
Use nominal
values
for computations
± 1/8 inch
± 1/8 inch
± 1/16 inch
3 grids = 8 sq. ft.
25% of gross area
85% of gross area
depends on water absorption
per ASTM C140-70
see specification and
test procedure sheets
per ASTM C140-70 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
