|
|
 |
|
|
|
|
PRAIRIE Stone |
|
|
 |
|
DESCRIPTION OF CODE SYSTEM
All new PRAIRIE stone orders should be written in code form. In the past, each item was written out in long form describing the unit. We have come up with a code system to simplify the description. This Shapes Catalog that we have been using has this type of code system designating each shape drawing.
The system is first made up of the coded size of the unit deleting the ‘x’s between the number; i.e. 4x8x24 = 4824. After that is a series of two-letter codes divided by commas. (Note: It is IMPORTANT that the sizes are in order as follows: “bed depth” x “height” x “length”.) Attached is a list of shape codes that will be used to describe the units. The first two letters after the size will designate texture; Groundface (GF), Rockface (RF) or Textured Face(TF). After that should be the main designation i.e. Window Sill (WS), Single Chamfer (SC), etc. After that are other special designations i.e. Corners (CO), Drip Cuts (DR), etc. At the end of the description will be a color code preceded by a ‘-‘. If there are similar items in the order, we will designate them by a number in parenthesis following the color.
Below are a few examples of how we were writing orders compared to how you will be seeing them in the future. If you have any questions please contact your local sales representative.
Thank you,
Examples:
1. 4x4x24 Rockface - Midnight = 4424 RF-MD
2. 4x8x24 Groundface w/chamfer & drip – Alabaster = 4824 GF,SC,DR-AL
3. 6X4X24 Groundface w/chamfer, drip & right return – Buff (Shape 1) = 6424 GF,SC,DR,RT,RC – BF(1)
PRAIRIE stone CODES
COLORS
AL - ALABASTER
BF - BUFF
GR - GRAY
MD - MIDNIGHT
TEXTURE
GF - GROUNDFACE
RF - ROCKFACE
TF - TEXTURED FACE
MAIN DESIGNATION
SC - SINGLE CHAMFER
EC - END CHAMFER
DC - DOUBLE CHAMFER
FB - FULL BULLNOSE
WS - WINDOW SILL
CP - COPING PEAKED
CS - COPING SLOPED
CF - COPING FLAT
KS - KEYSTONE
SPECIAL DESIGNATIONS
CO - CORNER (1 END FINISHED)
BE - BOTH ENDS FINISHED
DR - DRIP CUT
MI - MITER INSIDE CORNER
MO - MITER OUTSIDE CORNER
QU - QUIRK (I.E. "QU,MO" - QUIRK MITER OUTSIDE CORNER)
RC - RETURN CORNER
RT - RIGHT HAND
LT - LEFT HAND
TG - TOP GROUND
BG - BOTTOM GROUND
AC - ANGLE CUT
EU - END UNIT (I.E. "CP,UE" - COPING PEAKED END UNIT)
NO - NOTCH CUT OUT
SP - SPECIAL UNIT (SEE ATTACHED DRAWING)
VS - VERTICAL SCORE (3/8" SQUARE CUT)
HS - HORIZONTAL SCORE (3/8" SQUARE CUT)
LC - "L" CORNER
WC - WASH CUT
ME - MEDALLIONS
AD - ADDRESS STONE
EG - END GROUND
BK - BACK FINISHED
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
